Cino FuzzyScan F780BT Hızlı Başlangıç Kılavuzu - Sayfa 4
Tarayıcı Cino FuzzyScan F780BT için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cino FuzzyScan F780BT 17 sayfaları. Bluetooth imager
Ayrıca Cino FuzzyScan F780BT için: Hızlı Başlangıç Kılavuzu (17 sayfalar), Manuel (2 sayfalar)
Sayfayı Yazdır
Decide Your Radio Link Mode
The FuzzyScan Bluetooth image scanner provides several radio link modes
to communicate with most host devices. When the Bluetooth-enabled host
device is not available, it can work with the smart cradle in PAIR mode
(peer-to-peer connection) or PICO mode (multiple connections) to provide a
plug-and-play cordless migration of your existing non-Bluetooth-enabled
host. Moreover, you can also use the scanner to work with Bluetooth-enabled
host via SPP mode or HID mode.
When the radio link is disconnected, the scanner is capable of reconnecting
automatically when it returns to the communication coverage. If you want to
change the radio link mode, please scan the "Uninstall" command to reset
the scanner to uninstall state.
PAIR Mode
If the Bluetooth device is not available in your existing system, PAIR mode is
the simplest plug-and-play solution. In this mode, a smart cradle can only
work with one scanner. The smart cradle not only provides the Bluetooth
radio link with the scanner, but also offers the legacy cabled interfaces to the
host device, including USB HID, USB COM and RS232 Serial.
PICO Mode
For the requirement of multiple connections, up to 7 scanners can be
connected to one smart cradle concurrently. If you want to un-pair all
scanners paired with the smart cradle, please press and hold the
paging/reset key of the smart cradle for more than 5 seconds. If you just want
to un-pair some of the paired scanners, please take those paired scanners to
scan the "Uninstall" command one by one.
HID Mode
Through the most useful HID service, the scanner can work as a Bluetooth
Keyboard. In this mode, the scanner will be discoverable by the radio
connection request issued by the remote host device.
SPP Master/Slave Mode
Through the standard SPP profile, the scanner can work as a Bluetooth
Serial Device. In SPP master mode, the scanner initiates the radio
connection request to the remote slave device. In SPP slave mode, the
scanner will be discoverable by the radio connection request issued by the
remote host device. Once the SPP slave pairing process is completed, the
radio link mode will be switched to SPP master automatically. This behavior
will enable auto-reconnection feature when the connection is lost.
3