ARC Technology ALMST-1405 Manuel - Sayfa 2

Güvenlik Sensörleri ARC Technology ALMST-1405 için çevrimiçi göz atın veya pdf Manuel indirin. ARC Technology ALMST-1405 5 sayfaları. Window/door detector

Sayfayı Yazdır

Pairing :



Pair Magnetic Switch Transmitter (ALMST ) with Siren.

1. Place battery into compartment of MST. Pay attention on direction of battery polarity.

2. Press and hold Siren Learn button about 3 seconds till LED will is slowly blinking to confirm in Learn

mode. Learn mode will be lasting 12 seconds then exit automatically.

3. Using small tool to press and hold ALMST " SET " button about 3 seconds while Siren in Lean mode

to pair ALMST with Siren. ALMST and Siren's LED will be quickly blinking 5 times to confirm paired

successfully.



Test function of ALMST with Siren,

 Enter test mode

1 : Short press " Set " button one time. ALMST LED will be slowly blinkingg.

2 : Place Magnetic together with Switch Transmitter then apart magnetic from Switch

transmitter more than 1cm, Siren LED will be alarm flashing two times accompany two alert

sounds.

3 : Place magnetic together with Switch Transmitter again, Siren will be alarm flashing one time

accompany an alert sound.

4 : Repeat procedure 1 and 2 for more than two times to confirm it is working with Siren.

 Short press " Set " again will stop alarm flashing and exit test mode immediately. Test mode will

expire automatically after 20 seconds .

Fig 5

Enter Learn Mode

Fig 6

Press and hold Set for 3 seonds

Version 1.