CIOKS 9000-0012-1863 Hızlı Başlangıç Kılavuzu - Sayfa 6
Güç Kaynağı CIOKS 9000-0012-1863 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CIOKS 9000-0012-1863 9 sayfaları. Attaching of power supply to a pedaltrain board
Sayfayı Yazdır
CIOKS / Eventide PowerFactor 2 power supply underneath or on top of a Pedaltrain board.
Another case is if you now or later would wish to extend the PowerFactor 2 with more outlets and would
like to link it with another CIOKS power supply from the link range. There's not enough space in-between
the side and middle profile for these two power supplies linked together as shown on the first picture on
the left below. You should place the PowerFactor 2 so the middle of the link adapter will be situated just
above the middle profile of the PT-Pro board. This is shown on the following three pictures. Also you'll need
seven longer stand-offs. Those included with PowerFactor 2 or all link units are 8mm long. For the
arrangement shown below you need seven in 18mm length. These are available as a separate set.
On top of any Pedaltrain pedal board
If you wish to attach the PowerFactor 2 power supply on top of your Pedaltrain pedal board, please have a
look at the following pictures.
Page 6