Arc-Zone Sharpie DX A-PTGK-DHD-K Kurulum Kılavuzu

Elektrikli Alet Aksesuarları Arc-Zone Sharpie DX A-PTGK-DHD-K için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Arc-Zone Sharpie DX A-PTGK-DHD-K 2 sayfaları.

Sayfayı Yazdır

installationguide

installation

•

SHARPIE HEAD KIT ASSEMBLY

Step# 1

"Screw" all the way down, till contact is made to the base of motor.

Step# 2

Insert Mandrel into collet. Leave a 1/16" (1.6mm) gap from the bottom

use 3/8"(9.5mm) open end wrench to tighten collet nut.

Step# 3

With the small allen wrench (included in kit), remove Mandrel Screw from

the Mandrel. Thread on Lower Housing and snug down fairly tight.

Step# 4

Remove ONLY the 2 side screws from Upper Housing using

guide

Install O-ring spacer to threads on motor.

of Mandrel shank. Depress lock button on motor,

Align Sharpie logo with lock button on motor.

Test run motor to ensure smooth operation.

the large allen wrench (included in kit) to

detach the Upper Housing from the Lower Housing

2091 Las Palmas Drive, Ste. F

Carlsbad, CA 92011-1551 - USA

(Milwaukee cordless only)

from

DO NOT OVER TIGHTEN

Arc-Zone.com, Inc.

Tel. 760-931-1500

[email protected]

1 / 2