Axor Citterio M 34133XX1 Kurulum Talimatları Kılavuzu - Sayfa 7

İç Mekan Mobilyaları Axor Citterio M 34133XX1 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Axor Citterio M 34133XX1 12 sayfaları. Widespread lav set
Ayrıca Axor Citterio M 34133XX1 için: Parça Listesi (1 sayfalar)

Sayfayı Yazdır

Install the pop-up drain

Remove the plunger assembly.

plunger

Unscrew the drain outlet flange from the tee.

height adjuster

Unscrew the tailpiece from the tee. Wrap the

threads with plumbers' thread tape and replace.

Install the white, flexible sealing gasket to the

flange

flange. Place it in the sink outlet.

From under the sink, install the black mack gas-

ket, white friction ring and retainer nut to the

flange. Do not tighten the nut against the bottom

sealing gasket

of the sink at this time.

Thread the tee and tailpiece to the flange. The

mack gasket

pivot must face the faucet. If necessary, turn the

drain assembly.

friction ring

pull rod

Tighten the retainer nut.

Place the plunger assembly in the drain.

retainer nut

Install the horizontal rod so that the end goes

through the loop in the bottom of the height

adjuster.

tee

Install and hand tighten the pivot ball nut.

pivot ball nut

Attach the swivel connector to the end of the

horizontal rod.

horizontal rod

tailpiece

swivel connector

Attach the swivel connector to the end of the pull rod.

Position as desired and tighten with a small, flat bladed

screwdriver.