Cipax CPX 23020 Kurulum ve Kullanıcı - Sayfa 13

Tank Ekipmanları Cipax CPX 23020 için çevrimiçi göz atın veya pdf Kurulum ve Kullanıcı indirin. Cipax CPX 23020 18 sayfaları. Closed tank 3000l
Ayrıca Cipax CPX 23020 için: Kurulum Kılavuzu (10 sayfalar)

Sayfayı Yazdır

Choose a location where there will be a sufficient incline for drainage pipes and where the

ground is considered to be well drained and stable. The pit should be at least 50 cm around

the tank's external dimensions.

The tank must not be located where there is a risk of being driven over, e.g. by cars; where

there is a risk at any time of the year that the groundwater level reaches the inlet pipe or

where the ground is marshy and unstable. Consideration should also be given to the frost

depth of the location.

Remember to:

Investigate the maximum permitted distance and suction height for waste removal vehicles

for the areas prior to installation.

Material

The tank should be placed on a 150 mm thick

and well flattened bed of fine gravel or sand without

any sharp stones that can harm the tank.

Ideally this bed should be compressed by using a vibrator.

If there is any risk the ground water level can reach

up to the bottom of the tank it should then

be secured. At empty tank and maximum permitted ground

water level the lifting impact is 30 000 N which is comparable

with 3 000 kg. To keep the tank in place the anchoring

strength must have corresponding power. The tank can be

secured with soft bands or specific anchoring canvas.

Note:

The lifting force for an empty tank and

maximum permitted groundwater level is 30,000 N!

Equivalent to a lifting force of 3,000 kg.

Tank pit

Securing of the tank