Accurate Technology ProScale Kullanıcı Kılavuzu - Sayfa 16
Ölçüm Cihazları Accurate Technology ProScale için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Accurate Technology ProScale 20 sayfaları. Flush mount readouts
Ayrıca Accurate Technology ProScale için: Hızlı Başlangıç Kılavuzu (17 sayfalar)
Sayfayı YazdırBaud Rate
To display the current baud rate (from default), type in:
b<ENTER>
The receiver responds with:
Baud rate = ¸
(Factory Default = 9600)
To change the baud rate to 19200, type:
B19200<ENTER>
The receiver responds with:
Baud rate will be = 19200
The baud rate change becomes effective 1 second after the command is issued
to allow the change message to be sent at the old baud rate.
Available baud rates are:
2400
4800
9600
19200
38400
57600
115200
Firmware Version ID
To display the current firmware version, type in:
v<ENTER> or V<ENTER>
The receiver responds with:
ProScale Receiver V1.xxx
Where xxx is the minor revision number.
Invalid Command
If an invalid command letter is entered, the receiver will provide the following
response:
Use t, s, o, d, v, b, m or e.
Upper case to edit, lower case to view.
ProScale RF Receiver User Manual
Page 16 of 20