Arcade Albermarle ARC25 Kurulum Talimatları
Küvetler Arcade Albermarle ARC25 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Arcade Albermarle ARC25 2 sayfaları.
Sayfayı Yazdır
Parts supplied:
Important
• Please unwrap the bath and check it carefully to ensure it has not been damaged in handling or transport.
• Please check that all parts have been supplied.
• Assemble bath on a mat to protect against damage to bath surface.
• Please do not remove the old fixture before you unpack and inspect the new unit.
• Store the bath in a safe place until you begin installation to avoid damage.
• Any installation should be carried out by a qualified tradesman with knowledge of statutory plumbing requirements in your area.
• This product requires a two person lift – use proper lifting techniques.
• This installation guide does not include details of waste connection; final decision about installation of waste connection should be taken by a suitably qualified person.
1x
Care and Maintenance
The bath outer is made from nickel plated stainless steel.
Clean with water or a soft detergent and dry with a soft cloth. Do not use detergents containing hydrochloric acid or caustic or abrasive materials, chemicals or cloths.
Install following the instructions.
Everyday cleaning
We recommend a non-abrasive bathroom cleaner.
Warning
Never use cleaners / bleach products specifically manufactured for WC bowl cleaning as they may damage your bath. In addition to these we strongly recommend
that applying hair colouring is also not used over the bath as it may de-colour the bath.
4x
1
Under floor access may be required for plumbing of bath waste.
Albermarle free standing bath with nickel finish stainless steel surround
2
to drainage
Waste connection is dependent on the site situation; final
decision about installation of waste connection should be
taken by a suitably qualified person.
1 - 2
Please place your bath
identification number
here and keep this
paperwork in a safe
place as you will
need this if a problem
occurs with your product.
3
Install the waste according to the installation instruction
supplied with the waste.
ARC25
Manufacturers
Identification Number
XXXXXXXXXX
In the event of after
sales requirements
please quote this
number.
A