CipherLab 1166 Manuel - Sayfa 5
Barkod okuyucu CipherLab 1166 için çevrimiçi göz atın veya pdf Manuel indirin. CipherLab 1166 6 sayfaları. Bluetooth scanner
Sayfayı Yazdır
Continuous mode (non trigger use) with Auto power off mode
NOTE: 1266 Laser Scanners only. Never set a 1266 Laser Scanner to "Continuous Mode".
Use "Auto Power Off Mode" as above with a maximum Time-out period of 30 seconds.
When you are confident with the scanning distance, you may wish to change to a continuous type mode. Fully
"Continuous Mode" may chew up the battery and therefore Auto Power Off Mode is recommended. The scanner will
stay continuous while in use. Non-use for a certain period (default is 10 seconds) puts the scanner to sleep. Press
trigger to reawaken.
Step
Action
1
Scan Enter Setup
2
Scan Auto Power Off Mode
3
Scan Update
Changing Scanner Time-out Duration
You may prefer a period longer than 10 seconds, before the scanner turns itself off,
For Example: Time-out period to be 30 seconds.
Step
Action
1
Scan Enter Setup
2
Scan Scanner Time-out Duration
3
Scan two Decimal Digits barcodes below for the time
required. If 30 seconds required scan 3, then 0. (99
seconds is maximum).
4
Scan Validate
5
Scan Update
Decimal Digits:
0
5
1
6
Page 5 of 5
Barcode
Barcode
See Decimal Digits table below
2
7
3
8
4
9