AXTON A295 Kurulum ve Kullanım Kılavuzu - Sayfa 3

Amplifikatör AXTON A295 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AXTON A295 20 sayfaları. Car audio system 1-/2-/4-channel power amplifiers

Sayfayı Yazdır

1. CONNECTIONS + CONTROLS A295

1.1 CONTROLS

RCA INPUTS 1/2-CH

Low-level stereo RCA signal input 1/2-CH for connection to head-unit.

INPUT GAIN CONTROL 1/2-CH

Input gain potentiometer for channel 1/2-CH, to match the output voltage of the head-

unit to the amplifier's input.

HIGH INPUT 1/2-CH

Molex connector terminal to insert the High level adapter (4-pin) that picks up the

amplified speaker signal from the head unit's front output (if head unit does not feature

dedicated RCA line outs).

OPERATION MODE SWITCH 1/2-CH

Slide switch to select the operation mode of the X-over for section 1/2-CH of the

amplifier.

X-OVER FREQUENCY CONTROL 1/2-CH

Control potentiometer to adjust the highpass or lowpass filtering frequency for

section 1/2-CH of the amplifier.

1.2 INPUTS + OUTPUTS

POWER LED

LED to show "operating" status of the amplifier by green/red illumination. Green is

normal working state, red is protect state of amplifier.

"GND" POWER INPUT TERMINAL

Terminal to connect the amplifier to the chassis ground or negative pole of the car

battery.

"REM" INPUT TERMINAL

Terminal to connect the amplifier to the automatic (remote) turn-on / turn-off lead of the

head unit.

"+12 V" POWER INPUT TERMINAL

Terminal to connect the amplifier to the positive +12V pole of the car battery.

10 ATC FUSE HOLDER

Fuse holder for 2 x 20 A ATC fuse. Never deploy fuses of higher amperage rating.

11 SPEAKER OUTPUT TERMINAL

Output terminal to connect the speakers to the amplifier in either stereo or bridged

mode.

– 4 –

1. CONNECTIONS + CONTROLS A295

6 7

4 5

8 9

– 5 –