Arcam FMJ P35 El Kitabı - Sayfa 11
Amplifikatör Arcam FMJ P35 için çevrimiçi göz atın veya pdf El Kitabı indirin. Arcam FMJ P35 16 sayfaları. Amplifiers
Ayrıca Arcam FMJ P35 için: Kullanıcı Kılavuzu (8 sayfalar), Servis Kılavuzu (18 sayfalar)
Sayfayı Yazdır
Installation: P35 power amplifi er
VOLTAGE
SELECT
POWER INLET
CONNECTING TO OTHER EQUIPMENT
Follow the installation instructions for the integrated amplifier on
pages 4–6.
– Connect this input to the output sockets of your pre-
AUDIO IN
amplifier or the
sockets of an integrated amplifier.
PRE OUT
– The power amplifier can be adapted to provide two
MONO LINK
mono loudspeaker outputs from a single input. Pull out the link
supplied and use it to connect the
together. Using one power amplifier per loudspeaker will enable you
to bi-amplify bi-wireable loudspeakers.
This is particularly beneficial for top quality stereo installations with a
separate pre-amplifier, or where amplifiers are provided for the left,
centre and right channel loudspeakers in a five speaker Dolby Pro
Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
'Daisy chaining' – The power amplifier can be connected to further
power amplifiers to drive more speakers (e.g. those in other rooms or
tri-amplified speakers, etc).
Connect the extra power amplifier inputs to the
on the power amplifier, left to left, right to right.
+
–
+
R/CH1
L/CH2
SP2
4 – 16 OHMS
TRIG
OUT
SP1
REMOTE
IN
+
–
+
R/CH1
L/CH2
and
sockets
L
R AUDIO OUT
sockets
AUDIO OUT
–
AUDIO
LINK
L
R
–
IN
OUT
REMOTE SWITCHING
By making a connection from the
amplifier to the
TRIG OUT
can use the A32 to switch the power amplifier on and off. If configured
in this way, the front panel
button on the remote control) switches both amplifiers on
STANDBY
and off together. This facility allows you to conceal the power amplifier
yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead (stereo
or mono) and it is possible to connect several power amplifiers to an
A32 by 'daisy chaining' from
of the next.
THREE CHANNEL OPTION
The power amplifier can be upgraded from stereo to three channels
by adding a Third Channel Module: in this case, the model is designated
P35/3.
The module offers extra loudspeaker terminals together with a third
set of
and
AUDIO IN
a 3 x 90W (RMS per channel into 8 ) amplifier suitable for Home
Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.
11
+
–
CTR/CH3
SP2
4 – 16 OHMS
SP1
+
–
CTR/CH3
Optional Third Channel Module
– provides a third 90W channel
suitable for Home Cinema or
multi-channel audio use.
socket of the P35 power
REMOTE IN
socket of the A32 integrated amplifier, you
button of the A32 (or the
POWER
of one P35 into the
TRIG OUT
phono sockets and converts the P35 into
OUT
CTR/CH3
AUDIO
IN
OUT
POWER/
REMOTE IN