Arcam P49 El Kitabı ve Talimatlar - Sayfa 4

Amplifikatör Arcam P49 için çevrimiçi göz atın veya pdf El Kitabı ve Talimatlar indirin. Arcam P49 13 sayfaları. Integrated amplifier/pre-amplifier/power amplifier

Sayfayı Yazdır
Arcam P49 El Kitabı ve Talimatlar
A49
Pre-amplifier output
connections
PRE OUT
provides the pre-amp output for
Audio inputs
use in a bi-amplified system (for example,
AUX, Tuner, SAT, BD,
with a P49/P349 power amplifier). See
and
are all
PVR
AV
page 11 for more information.
line-level inputs.
Balanced XLR audio inputs
See page 10 for
more information.
Use these sockets to connect to your
PHONO (MM)
source component if the source has
has different
balanced XLR outputs. If your source
characteristics. See
component has unbalanced outputs,
page 20 for the phono
use the phono inputs. For more
input specification.
information see page 10.
PHONO
GROUND
PHONO
RECORD
PRE
AUX R
AUX L
PRE OUT R
PRE OUT L
ONLY
(MM)
CD
TUNER
SAT
BD
PVR
AV
OUT
OUT
R
L
PHONO
AUX
4–16 OHMS. CLASS 2 WIRING
4–16 OHMS. CLASS 2 WIRING
SPEAKER 1
SPEAKER 2
SPEAKER 2
Phono earth terminal
Speaker terminals
For connecting your turntable
The A49 is equipped with two
earth lead, if required.
pairs of speaker terminals. See
page 15 for information on
Note that this terminal must
connecting loudspeakers.
not be used as a safety earth.
Record output
is a line level output for
RECORD OUT
use in recording from other sources.
See page 11 for more information.
Balanced XLR audio outputs
Provides a balanced pre-out for use
in a bi-amplified system (for example
with a P49/P349 power amplifer). See
page 11 for more information.
Accessory power
6V 3.5mm mono jack socket for accessory cable
Phones
(supplied). Cable provides two 2.1mm DC jacks
to power 6V r series accessories.
3.5mm stereo jack socket,
12V 2.5mm DC jack socket for accessory cable
intended for use with a set of
(supplied). Cable provides a 2.5mm DC jack to
headphones. See page 11 for
power 12V r series accessories.
more information.
POWER / STANDBY
PH O N O 20
TRIGGER OUT
ACCESSORY

POWER

MUTE
DISPLAY
BALANCE
6V
1A 12V
1.5A
CD
TUNER
SAT
BD
PVR
AV
SP1
SP2
PHONES
POWER INLET
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
SUPPLY
SPEAKER 1
VOLTAGE
110-120V/220-240V ~ 50-60 Hz
350W MAX
Power inlet
Voltage select
Connect the correct
Ensure that the voltage selected
mains cable here.
matches your local power supply.
Trigger output
allows the A49 to control the
TRIGGER OUT
power state of any connected equipment,
Note
such as a P49/P349 power amplifier. In
Please read the 'Placing the unit', 'Power' and
normal use there is no need to make any
'Interconnect cables' sections on page 5 before
connections to these outputs.
connecting up your A49 integrated amplifier!
E-6
C49
connections
Audio inputs
AUX, Tuner, SAT, BD,
and
PVR
line-level inputs.
See page 10 for
more information.
PHONO (MM)
has different
characteristics. See
page 21 for the phono
input specification.
PHONO
GROUND
PHONO
ONLY
(MM)
CD
TUNER
SAT
BD
PVR
POWER
Phono earth terminal
For connecting your turntable
earth lead, if required.
Note that this terminal must
not be used as a safety earth.
Pre-amplifier output
Balanced XLR audio outputs
PRE OUT
provides an unbalanced output
Provides a balanced output for
for connection to a power amplifier (for
connection to a power amplifier (for
example a P49/P349). See page 11 for
example a P49/P349). See page 11 for
are all
AV
more information.
more information.
Balanced XLR audio inputs
Accessory power
Use these sockets to connect to your
6V 3.5mm mono jack socket for accessory cable
source component if the source has
(supplied). Cable provides two 2.1mm DC jacks
balanced XLR outputs. If your source
to power 6V r series accessories.
component has unbalanced outputs,
12V 2.5mm DC jack socket for accessory cable
use the phono inputs. For more
(supplied). Cable provides a 2.5mm DC jack to
information see page 10.
power 12V r series accessories.
PHO N O 20
RECORD
PRE
AUX R
AUX L
PRE OUT R
PRE OUT L
TRIGGER OUT
AV
OUT
OUT
ACCESSORY
POWER
6V
1A 12V
1.5A
PHONO
AUX
CD
TUNER
SAT
POWER INLET
110-120V/220-240V ~ 50-60 Hz
350W MAX
Record output
Power inlet
RECORD OUT
is a line level output for
Connect the correct
use in recording from other sources.
mains cable here.
See page 11 for more information.
Trigger output
allows the C49 to control the
TRIGGER OUT
power state of any connected equipment,
such as a P49/P349 power amplifier. In
normal use there is no need to make any
connections to these outputs.
E-7
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones. See page 11 for
more information.
POWER / STANDBY
MUTE
DISPLAY
BALANCE
BD
PVR
AV
PHONES
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
SUPPLY
VOLTAGE
POWER
Voltage select
Ensure that the voltage selected
matches your local power supply.
Note
Please read the 'Placing the unit', 'Power' and
'Interconnect cables' sections on page 5 before
connecting up your C49 pre-amplifier!