Cirago HydraDisplay X3 Manuel - Sayfa 2
Adaptör Cirago HydraDisplay X3 için çevrimiçi göz atın veya pdf Manuel indirin. Cirago HydraDisplay X3 2 sayfaları. Displayport to 3 displayport multimonitor adapter
Ayrıca Cirago HydraDisplay X3 için: Manuel (2 sayfalar)
Sayfayı Yazdır
Description
The Cirago HydraDisplay X3 Multimonitor Adapter allows users
to enjoy multiple monitors from a single digital output port for
each application, such as gaming, graphics design or
spreadsheet analysis; or the user can choose to dedicate each
monitor to a separate application. There is no additional system
software or driver required.
System Requirements
The HydraDisplay X3 is compatible with computers which have
a DisplayPort output interface, running most Operating
Systems. This product is for use with listed computers or ITE
equipment.
Installation Overview
Follow the Installation Procedure listed below to install the
Cirago HydraDisplay X3. It is recommended that monitors of
the same size and resolution are used for the connection.
Same type monitors means the monitors have the same native
resolution and same refresh rate.
Installation Procedure
Step 1: Connect DisplayPort input to a video source, such as
desktop or notebook PC DisplayPort output connector. (Cable
for DisplayPort input is provided on the adapter)
Step 2: Connect USB cable provided on the adapter to your
PC or notebook.
Step 3: Connect DVI output port 3, 2 and 1 to three monitors
respectively according to the monitors' display sequence from
left to right.
Step 4: Power on PC and monitors. Select monitors' input port
to DVI.
Step 5: The Cirago HydraDisplay X3 will automatically
configure the output to expanded mode.
Step 6: To change the display to clone mode, change the
output resolution on your PC and select horizontal solution
equivalent to your monitor native resolution or below.
Change the display settings
After installation, you will see the same image on all monitors
(clone mode) or a single image spread across multiple
monitors. To change the display setting, simply change the
graphic card output resolution via the Display Properties
page.