Creative Structures Crossover L Demirleme Talimatları - Sayfa 6
Çadır Creative Structures Crossover L için çevrimiçi göz atın veya pdf Demirleme Talimatları indirin. Creative Structures Crossover L 16 sayfaları.
Ayrıca Creative Structures Crossover L için: Kurulum Kılavuzu (17 sayfalar)
Sayfayı Yazdır
2.2 Anchoring with ballast
The Crossover L can be anchored with ballast by using the additional ballast system. It is possible to connect
one, two, three or four structure feet at one anchor point.
2.2.1 Anchoring
Step 1
Slide the two ballast supports into the ballast interface and secure it with M12 screws.
Ballast support
CS-0522
!
Anchoring guide Crossover L
one
Crossover L structure foot with ballast
Screw connection
DIN 912 M12x120
Check the condition of the rubber friction strips
Replace them when damaged
www.creativestructures.nl
Ballast interface
CS-0523
Ballast support
CS-0522
Page 6