AXTRA AX-BC36 Kullanıcı Kılavuzu - Sayfa 7

Akü Şarj Cihazı AXTRA AX-BC36 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AXTRA AX-BC36 10 sayfaları.

Connecting to the Battery with Battery Clamps

Do not connect the AC power plug until all other connections are made. Identify

the correct polarity of the battery terminals on the battery. The positive battery

terminal is typically marked by these letters or symbol (POS,P,+). The negative

battery terminal is typically marked by these letters or symbol (NEG,N,-). Do not

make any connections to the carburetor, fuel lines, or thin, sheet metal parts. The

below instructions are for a negative ground system (most common). If your

vehicle is a positive ground system (very uncommon), follow the below

instructions in reverse order.

1. Connect the positive (red) battery clamp or eyelet terminal connector to the

positive (POS,P,+) battery terminal.

2. Connect the negative (black) battery clamp or eyelet terminal connector to the

negative (NEG,N,-) battery terminal or vehicle chassis.

3. Connect the battery charger into a suitable electrical outlet. Do not face the

battery when making this connection.

4. When disconnecting the battery charger, disconnect in the reverse sequence,

removing the negative first (or positive first for positive ground systems).

Page | 7