Axvue E660 Kullanım Kılavuzu - Sayfa 8

Bebek Monitörü Axvue E660 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Axvue E660 12 sayfaları. With 2.4" lcd screen and night vision

Sayfayı Yazdır
Favorite features (continued)
Volume adjustments allow higher volume se�ngs for parents who want to hear every li�le sound
from baby, like cooing, and lower volume se�ngs to monitor louder sounds and cries from baby.
Easily adjust the volume based on your preferences and the level of other sounds in the home.
Brightness can be adjusted, as well, to accommodate the level of light in the room. Using the
brightness control feature enables lighter or darker video, depending on room viewing condi�ons.
Use the UP and DOWN arrows to adjust the brightness.
While opera�ng on ba�ery power, the video screen will go to sleep, to conserve ba�ery power.
Audio and sound lights con�nue to func�on normally. Video sleep mode is not available when
using AC adapter.
This bu�on turns the video mode on from video sleep mode. It is ideal for a quick view of baby in
the middle of the night. To monitor in audio only mode, simply press the VIDEO ON/OFF again to
turn the video screen off.
FAQ
-Make sure the camera and handheld monitor unit are paired (see page 5 )
-Make sure the camera and handheld monitor unit are both turned on
-Make sure the AC adapters are plugged in
-Make sure the outlets are working
-Make sure the ba�ery is charged before working as portable mode
-Keep the camera and monitor out of WiFi router (more than 10 feet ) off.
-Press the VIDEO ON/OFF bu�on once to turn on video mode
-Check to make sure nothing is blocking the camera
-Test recep�on by moving the monitor and/or camera to different loca�ons
-Pair the camera and monitor again
-Power the monitor completely off, remove and re-insert the ba�ery, then turn monitor back on.
-Turn up the volume using Volume Control
-Make sure the camera and handheld monitor unit are paired.
-Posi�on the monitor closer to the camera, but not adjacent.
-Move the monitor away from other electronic devices, WiFi router, etc.
-Adjust the brightness using Brightness Control
-Test recep�on by moving the monitor and/or camera to different loca�ons
SQUEALING SOUND COMING FROM SPEAKER ON MONITOR
-Move the monitor and camera further away from each other
-Turn the volume down using Volume Control
-Power the monitor completely off, remove and re-insert the ba�ery, then turn the monitor on again.
PAGE 7
ADJUSTABLE VOLUME AND BRIGHTNESS
POWER-SAVE MODE
VIDEO ON-OFF BUTTON
NO PICTURE OR SOUND
SOUND BUT NO PICTURE
PICTURE BUT NO SOUND
PICTURE NOT CLEAR