CIRCLE FITNESS Sp7 Kullanıcı El Kitabı - Sayfa 5

Egzersiz Bisikleti CIRCLE FITNESS Sp7 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. CIRCLE FITNESS Sp7 17 sayfaları.

CAUTION: During assembly it is recommended that all bolts be tightened by hand,

upon completing assembly, bolts should then be properly secured using the wrench

provided. To avoid injury, check bolts carefully before use.

Assembly

Step one

Attach the rear foot tube (14) first by lifting up

the rear of the frame and sliding the rear foot

tub under the frame. Align the holes of the

tube and frame then insert bolt (10) from

below. Secure the bolt with washer (9) and nut

(8) use the wrench. Use the same procedure

to secure the front foot tube (18).

Attach the top protect cover (68) to the frame

using the bolts (71) to fixed.

Step two

Attach the handlebar post (22) by inserting it

into the head tube on the frame. Make sure

the release lever (6) is loose enough so the

handlebar post can slide down to the desired

position. Tighten the release lever (6) to

secure.

Attach the handlebar slider (23) on the top of

handlebar post (22), make sure secure by

tighten the release lever (17) from below.