Digichain WP6K Kullanıcı Kılavuzu - Sayfa 3

Tuş takımı Digichain WP6K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digichain WP6K 20 sayfaları. Wallplate control keypad 6-program buttons to send ip&rs232 commands to control third-party devices

Sayfayı Yazdır

Programmable Control Panel

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

 Unpack the equipment carefully and save the original box and packing material for

possible future shipment

 Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to

persons.

 Do not dismantle the housing or modify the module. It may result in electrical shock or

burn.

 Using supplies or parts not meeting the products' specifications may cause damage,

deterioration or malfunction.

 Refer all servicing to qualified service personnel.

 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

 Do not put any heavy items on the extension cable in case of extrusion.

 Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

 Install the device in a place with fine ventilation to avoid damage caused by overheat.

 Keep the module away from liquids.

 Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

 Do not twist or pull by force ends of the optical cable. It can cause malfunction.

 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

 Unplug the power cord when left unused for a long period of time.

 Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

Digichain Electronics