digico SD12 Teknik Notlar - Sayfa 5
Müzik Mikseri digico SD12 için çevrimiçi göz atın veya pdf Teknik Notlar indirin. digico SD12 6 sayfaları. Replacing and cleaning faders
Ayrıca digico SD12 için: Manuel (9 sayfalar)
Sayfayı Yazdır
If the layout of screen is not as shown (2 to the left of 1 and 3 above 1 & 2) this must be set.
With a new screen it will default to a horizontal spread.
Use the mouse in the conventional manner to click and drag the screens so they match above.
Note how the edges align.
The system will detect the appropriate settings for the overview screen in use (Plug & Play
operation).
When above screen(s) are correctly set up, click on apply and OK to close the window.
It is possible to repeat this process with several different examples of overview screens and the
operating system will detect and remember settings for each screen, so long as the HORM
protection is disabled.
If the same screen is used again, the setup will be recalled automatically without further
adjustment. Note this applies to specific individual screens, not models or types of screen in
general.
To clear the HORM system prior to re-saving and to check the settings are correctly saved, click
on the start button and close Windows as normal. Power cycle the mixer.
See the mixer program start. Confirm the screens appear to work as expected.
As above quit to Windows and restart the HORM program, from the tool bar icon.
Note the HORM icon should show protection is not active
See the first Window open (note how HORM is always shown enabled)
Click on configure as before and see the second window open
TN372
Page 5