Circle Tech M-800 Kullanıcı Kılavuzu - Sayfa 4
Cep Telefonu Circle Tech M-800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Circle Tech M-800 15 sayfaları. Digital color screen mobile phone
Sayfayı Yazdır1.1.2
Using T-Flash Card
You can use T-Flash card to enlarge your phone's memory capacity. The phone can support two memory cards.
The memory card slot is at the bottom of the battery. You need take the battery out and then insert the memory card with the label side face up.
1.2
Batteries
Batteries have been charged to 50% full. It can be used after unpack. The first three times batteries must be totally discharged before charging.
It will help to prolong the batteries lifespan and working quality.
1.2.1
Changing a battery
Please follow the steps to remove the battery:
n
Push the back cover backward.
n
Lift the battery up to remove it.
1.2.2
Charging a battery
The device prompts a warning tone and message stating insufficient battery when the battery power of your device is low.
Please follow the instructions mentioned below to charge your device:
Plug the connector of the charger into the jack of the device or plug the charger into a standard AC wall outlet.
n
Battery charging indicator sign will flash; if mobile phone is switch off during charging, the indicator sign will show on the screen. If the
battery is too weak, the charging indicator sign will not show immediately after the charger plugs in.
n
When charging indicator sign shows the battery is full and stop flashing, charging is finished. If charge when switch off, the screen shows
charging finished. The charging will last for a few hours. It is normal that the battery, mobile phone, and charger's temperature rise.
Disconnect the mobile phone, charger, and socket after charging finish.
1.3
Connecting network
1.3.1
SIM card
n
Please insert the SIM card before switch on the mobile phone. SIM card is the key to GSM network.
n
When you subscribe to a cellular network, the plug-in SIM card loaded with our subscription details such as your call history, call record,
messages, and others. SIM card can be removed and inserted into any GSM mobile phone ( new mobile phone can read SIM card
simultaneously)
n
The plug-in SIM card and its contacts can be easily damaged by scratches or bending, please keep SIM card away from electric, magnetic
objects. Once the SIM card is damaged, it wills loss the accessibility to GSM network.
Warning: Switch off the mobile phone before remove the SIM card. It is forbidden to remove the SIM card when the power resource is
connected.
1.3.2
Insert SIM card
n
Switch off mobile phone and remove external electrical source.
n
Insert the SIM card into the phone with the gold-colored contacts facing down.
1.3.3
Power on or off
Power on: hold the End key to turn on the phone. If necessary, enter the phone password and PIN then press OK key.
Power off: hold the End key.
1.3.4
Unlock the SIM card
To eliminate unauthorized usage, SIM card can be locked by adding PIN number. Once select this function, PIN must be inputted every time the
mobile is switch on. If user does not set SIM card protection method, SIM card can not be protected from unauthorized usage.
n
Press End key to switch on.
Input PIN number, use Right soft key to erase wrong input. Press OK key to finish. For example, if PIN is 1234, then please input 1234.
If wrong input for 3 times, the SIM card will be locked by the network. It requests PUK1 number, if you do not know PUK1 number, please do not
input yourself. Give the SIM card to cellular network service to deal. Detail information please refer Security setting
Attention: The network supplier will set a standard PIN (between 4 to 8 digitals) for your SIM card. Please change it to your personal pass word.
For detail please see Security setting
1.3.5
Unlock the mobile phone
Please set phone password to protect your mobile phone from unauthorized usage. Once select this function, phone password must be inputted
every time the mobile is switch on. If user does not set phone password protection method, the mobile phone can not be protected from unauthorized
usage
n
Input mobile phone password, use Right soft key to erase wrong input. Press OK key to finish. For example, if the password is 000000,
then please input 000000.
n
If you forget the mobile phone password please contact the local sales branch or service centre to unlock the mobile phone. (Default
mobile phone password is 000000)
1.3.6
Connecting to the network
After the SIM card is unlocked, the mobile phone searches for network service. Once connected, the cellular service provider will show on the
4