Axxess ASWC-1 Kullanıcı Kılavuzu - Sayfa 5

Otomobil Aksesuarları Axxess ASWC-1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Axxess ASWC-1 6 sayfaları. Connections
Ayrıca Axxess ASWC-1 için: Kurulum Talimatları (4 sayfalar), Talimatlar (5 sayfalar)

Sayfayı Yazdır

To reset a button back to its original use, repeat step 1 above. Then press the

"Volume down" button. The LED will go out and the long press mapping for the

button will be

erased.

Troubleshooting the Auto-Detect Mode

So you tried the auto-detect feature and at the end the LED did not stay on solid red, it

started flashing, that means the ASWC did not detect the vehicle. Follow these steps

to determine what happened:

First some basic steps:

1) Verify that you have 12 volt accessory and a good chassis ground to the ASWC-1.

2) Verify with the vehicle information sheet from the Axxess website

(www.axxessinterfaces.com) that you connected the correct steering wheel

control wire(s) in the vehicle to the correct wire(s) on the ASWC-1.

3) Verify that the 3.5mm connector is connected to your radio securely and in the

correct location.

4) If using the female 3.5mm connector on an Eclipse, JVC, or Kenwood radio,

verify that the radio's SWC wire is connected to the correct wire on the ASWC-1.

Button

New Button

Number

Assignment

Not allowed

SEEK UP/NEXT

SEEK DOWN/PREV

MODE/SOURCE

MUTE

PRESET UP

PRESET DOWN

POWER

BAND

PLAY/ENTER

PTT

ON HOOK

OFF HOOK

FAN UP

FAN DOWN

TEMP UP

TEMP DOWN