Axxess Automobile Accessories Kurulum Talimatları Kılavuzu - Sayfa 11

Otomobil Aksesuarları Axxess Automobile Accessories için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Axxess Automobile Accessories 12 sayfaları. Axxess interface automobile accessories user manual

Sayfayı Yazdır

4. If you have a different radio then Eclipse, press the Volume Up button

again till the led goes solid red, then release Volume Up. You have

now programmed Kenwood.

5. Here is the chart to show how many presses of the Volume Up button

is needed for which radio you are trying to program:

1st led flash is for Eclipse

2nd led flash is for Kenwood

3rd led flash is for Clarion

4th led flash is for Sony and Dual

5th led flash is for JVC

6th led flash is for Pioneer and Jensen

7th led flash is for Alpine*

8th led flash is for Visteon

9th led flash is for Valor

10th Clarion 5V

* Note: If the ASWC flashes 7 times and you do not have an Alpine

radio connected to it that means that the ASWC did not see any radio

connected. Verify the 3.5mm connector is connected to the SWC input on

the radio.

6. Once the radio manufacturer has been selected hold Volume Down

for at least 5 seconds. The led will flash the number of times which

radio was selected then the led will remain on to indicate the ASWC

has finished programming.

7) Go enjoy your radio.