Axxess AX-MLINK-HD Kurulum Kılavuzu - Sayfa 2

Otomobil Aksesuarları Axxess AX-MLINK-HD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Axxess AX-MLINK-HD 8 sayfaları. Car audio wi-fi a/v mirror interface through hdmi

Sayfayı Yazdır

On the aftermarket in-dash mobile video screen:

• Have the device in the HDMI

-IN source; depending on the brand of screen you

™

have, this may be labeled differently.

IOS SYSTEM

On the IOS 7 device:

1. Press Mode button once to switch to IOS mode:

• This will connect your IOS device to the mirror interface.

2. Swipe up from the bottom of your screen to access Control Center and then

tap AirPlay.

• If AirPlay is not seen, return to step 1 and make sure your IOS device is

connected to the "HotSpot###" in the Wi-Fi settings.

3. Turn on Mirroring: On AirPlay screen, tap Mirroring.

4. Once enabled, your IOS device's screen will be mirrored on your aftermarket

in-dash mobile video screen.

If your device is lower than IOS 7:

1. On your IOS device go to:

Settings > Wi-Fi > On > Choose a network... > Select "HotSpot###"

• This will connect your IOS device to the mirror interface.

2. On your IOS device, double-click the Home button to display your recently

used apps.

AX-MLINK-HD

How to link

3. Swipe the recently used apps twice from left to right until you see the AirPlay

icon. Tap the AirPlay icon to display a list of available AirPlay devices.

• If you do not see the AirPlay icon, your device may not be connected

successfully.

4. Select the name of your Wi-Fi A/V mirror converter (HotSpot###) and then

turn Mirroring On.

ANDROID SYSTEM

On the Android device:

1. Locate the Screen Mirroring setting and scan for compatible devices. Every

phone is different; depending on which Android operating system you have,

the Screen Mirror setting should be in your "Settings" screen under the

"Connections" tab.

Note: This should take about 30 seconds or less.

2. Your phone will then list available devices; select your Wi-Fi A/V Converter

model number to connect: (HotSpot###).

Note: This should take about 10-20 seconds.