Epson 10600 - Stylus Pro Color Inkjet Printer Hızlı Kurulum Kılavuzu - Sayfa 9
Yazıcı Epson 10600 - Stylus Pro Color Inkjet Printer için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Epson 10600 - Stylus Pro Color Inkjet Printer 34 sayfaları. Product brochure - efi fieryspark professional 2.0 rip
Ayrıca Epson 10600 - Stylus Pro Color Inkjet Printer için: Şartname Sayfası (8 sayfalar), Hızlı Referans (10 sayfalar), Teknik Özellikler (4 sayfalar)
Sayfayı Yazdır
Installing the Server Software
Follow the instructions in this section to install the software on the server.
They describe how to:
Assign a static IP address (see below)
•
Name the server (see page 6)
•
Install the Fiery Spark Server software (see page 6)
•
Connect the hardware key (page 7)
•
Install Command WorkStation
•
Install ColorWise Pro Tools (optional, see page 11)
•
Before you begin, make sure you have:
Installed the EPSON printer driver (see your EPSON printer
•
documentation for instructions)
Connected the printer to the server using the USB interface (Stylus Pro
•
7600 and 9600) or the FireWire IEEE 1394 interface (Stylus Pro 10000
and 10600)
Closed all open programs and turned off any virus protection programs
•
Assigning a Static IP Address
1. Right-click
My Network Places
2. Select
Properties
3. Right-click
Local Area Connection
4. Select
Properties
5. Double-click
If the server is using a DHCP connection, skip ahead to "Naming the
Server" on page 6.
.
.
Internet Protocol (TCP/IP
Assigning a Static IP Address
™
(see page 8)
.
.
).
|
5