Epson 1160 CFS Kurulum Talimatları Kılavuzu - Sayfa 4

Yazıcı Epson 1160 CFS için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Epson 1160 CFS 12 sayfaları.

H) Put the cartridge down on your work surface or bench, and insert a Rivet into the

exit port you just filled. Don't turn the cartridge upside down. Make sure the Rivet

is all the way in, so the head is touching the cartridge. Use a paper towel and wipe

any excess ink off the bottom of the cartridge. The Rivet will prevent leakage and

cross contamination from other inks.

Now go to the next color and repeat this process until all 4 of the chambers are full.

Take the filled cartridges and tubing to a place near your printer and set them on a

flat surface. Put a pencil or some sheets of paper under the end of the cartridge so

that it is perfectly level. Make sure the end of the tubes are open and not kinked or

twisted.

You are done for today. Let the freshly filled cartridges age overnight. You can

continue in the morning or later in the day with the next step in the process. This is

important, don't try to rush it. The ink needs about 8 hours to get fully absorbed by

the sponge. Any bubbles or gases will come to the surface and disappear.

2. Establish Working Condition of Printer- Make sure nozzle check is perfect

With an image on your screen and paper in the printer, click on file | print, then on

printer properties. When you see the Utility tab on the printer properties dialog

box, click on it, then on Nozzle check. This can also be done from the Control Panel

| Printers section by right clicking on the correct printer and then clicking on

properties.

S a v e

M o n e y

MIS Associates Inc

http://www.inksupply.com

a n d

I m p r o v e

2901 Auburn Rd

Fax: 248-289-6013

Y o u r

Auburn Hills, MI 48326

P r i n t i n g

800-445-8296