Epson 1280 - Stylus Photo Color Inkjet Printer Başlangıç Kılavuzu - Sayfa 12

Yazıcı Epson 1280 - Stylus Photo Color Inkjet Printer için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Epson 1280 - Stylus Photo Color Inkjet Printer 32 sayfaları. Product support bulletin(s)
Ayrıca Epson 1280 - Stylus Photo Color Inkjet Printer için: Kartuşların Değiştirilmesi (2 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Kullanıcı Kılavuzu (27 sayfalar), Uyumluluk Kılavuzu (1 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Buradan başlayın (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Ürün Bilgileri (13 sayfalar), Buradan Başlayın Kılavuzu (6 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (2 sayfalar), Ürün Destek Bülteni (4 sayfalar), Ürün Destek Bülteni (7 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar)

Sawgrass Technologies, Inc.

6. Clean the area where the adhesive will contact the printer with the alcohol pad

provided. Let dry.

7. Pull the bottom piece of 3M Dual Lock Tape off of the support bracket, peel the

plastic backing and attach to the marked position. Firmly push down the entire

piece.

8. Slide the print head left and right, as far as it will go to ensure that none of the tubing

or any part of the QuickConnect system touches the interior of the printer.

9. When you are confident that the QuickConnect system will not interfere with normal

print head movement, push the print head to the far right into the parked position.

10. Mark the position for the rubber bumpers used to prop open the lid. The bumpers

should be far enough towards the back of the printer, to keep the lid from putting

pressure on the Acrylic Support arm. See Fig 9 and Fig 10

SubliJet IQ

The support arm may need to be shifted left or

right, up to a quarter of an inch, if the tubing

contacts any part of the printer. If the tubing

appears overly stressed when the print head is in

the far left position, move the support arm slightly

left by pulling the 3M Dual Lock Tape connection

apart and reattaching. Make sure the 3M Dual

Lock Tape on the support arm is fully locked onto

the 3M Dual Lock Tape on the printer by applying

pressure to it and slightly twisting the support

arm back and forth.

Fig. 9

Getting Started Guide for the EPSON Stylus Photo 1280

Fig. 10