Epson 2000P - Stylus Photo Color Inkjet Printer Kurulum Kılavuzu - Sayfa 2

Yazıcı Epson 2000P - Stylus Photo Color Inkjet Printer için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson 2000P - Stylus Photo Color Inkjet Printer 17 sayfaları. Product support bulletin(s)
Ayrıca Epson 2000P - Stylus Photo Color Inkjet Printer için: Kartuşların Değiştirilmesi (2 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Teknik Özellikler (1 sayfalar), Ürün Bilgileri (13 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (2 sayfalar), Ürün Destek Bülteni (4 sayfalar), Ürün Destek Bülteni (7 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar)

Attaching the Paper Support

Insert the paper support into the slots at the rear of the printer.

Follow the steps below to plug in your printer.

1. Make sure that the printer is turned off. It is off when the P power

button protrudes slightly from the surface of the control panel.

2. Check the label on the back of the printer to make sure the voltage

required by the printer matches that of the electrical outlet you will

be plugging it into. Also, make sure that you have the correct power

cable for your power source.

Caution:

It is not possible to change the printer's voltage. If the rated voltage

and your outlet voltage do not match, contact your dealer for

assistance. Do not plug in the power cord.

3. If the power cord is not attached to the printer, connect it to the AC

inlet at the back of the printer.

4. Plug the power cord into a properly grounded electrical outlet.