Epson 2190 - FX B/W Dot-matrix Printer Kullanıcı Kılavuzu - Sayfa 13
Yazıcı Epson 2190 - FX B/W Dot-matrix Printer için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson 2190 - FX B/W Dot-matrix Printer 48 sayfaları. Impact printers
Ayrıca Epson 2190 - FX B/W Dot-matrix Printer için: Manuel (11 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özet (7 sayfalar)
Sayfayı Yazdır
2.
Insert the printer software
CD-ROM into the
CD-ROM or DVD drive.
The Installation screen
appears:
If it does not, double-click
Setup.exe
CD-ROM.
3.
Select Install Software and
click
.
4.
Select your printer from the list, then follow the instructions on the
screen.
5.
When the installation is complete, see page 15 to install the
Reference Guide and the EPSON Remote Configuration Utility.
For Windows 98, 95, or NT 4.0
1.
Make sure Windows is running and the printer is turned off.
2.
Insert the printer software CD-ROM into the CD-ROM or DVD
drive. The Installation window shown above appears. If it does not,
select Setup.exe on the CD-ROM.
3.
Select Install Software and click
4.
Select your printer, then click OK and follow the instructions on the
screen.
5.
If you are prompted to insert your Windows CD-ROM, do it now
and click OK . When the Windows installation screen appears, close
the screen to continue with the driver installation.
Note:
❏
If your PC came with Windows pre-installed, Setup may not need the
Windows CD-ROM to complete the installation.
❏
If you see a message that the drive is not accessible, click Cancel and
try again.
on the
.
Setting Up the Printer
13