Axxess AX-FT901 Manuel

Otomobil Elektroniği Axxess AX-FT901 için çevrimiçi göz atın veya pdf Manuel indirin. Axxess AX-FT901 8 sayfaları. Fiat 500 2015 / 500l 2014(with u-connect) data interface with swc & factory display retention †

Sayfayı Yazdır

Fiat 500

2015 /

500L

2014

† For Continental Mopar head unit

INTERFACE FEATURES

• Provides accessory power

• Designed for non-amplified models

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains audio controls on the steering wheel

* Attention! The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn't have a backup camera

Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.

INTERFACE COMPONENTS

• AX-FT901 interface

• ASWC-1 interface

• AX-FT901 harness

• ASWC-1 harness

AxxessInterfaces.com

Data Interface with SWC & Factory Display Retention

(with U-Connect)

• Retains balance and fade

• Retains most of the vehicle settings that was displayed on the

factory radio *

• Micro "B" USB updatable

AX-FT901

I N S TA L L AT I O N I N S T R U C T I O N S

†

TABLE OF CONTENTS

Connections to be made ....................................2-3

Installing the AX-FT901 interface ..........................3

Programming the ASWC-1 interface ................. 3-4

Screen operation ................................................4-6

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell

caps, etc.)

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

REV. 5/10/18 INSTAX-FT901