Epson 4000 - Stylus Pro Color Inkjet Printer Hızlı Referans Kılavuzu - Sayfa 6

Yazıcı Epson 4000 - Stylus Pro Color Inkjet Printer için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson 4000 - Stylus Pro Color Inkjet Printer 11 sayfaları. Print engine
Ayrıca Epson 4000 - Stylus Pro Color Inkjet Printer için: Broşür ve Teknik Özellikler (4 sayfalar), Ürün Referans Kılavuzu (38 sayfalar), Ürün Bilgileri (13 sayfalar), Buradan Başlayın Kılavuzu (6 sayfalar), Ürün Destek Bülteni (17 sayfalar), Önemli Bilgiler (2 sayfalar), Sınırlı Garanti (12 sayfalar), Broşür ve Teknik Özellikler (12 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar), Kurulum Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Epson 4000 - Stylus Pro Color Inkjet Printer Hızlı Referans Kılavuzu

Replacing Ink Cartridges (continued)

Hold the cartridge with the arrow mark pointing

toward the printer. Then insert the cartridge into

the slot. Don't force it.

Note:

If you can't insert the cartridge smoothly,

you may have the wrong cartridge. Check the

package and product code. If the Ink light remains

on after installing the cartridge, try removing and

then reinserting it.

Replacing Printer Parts

Replacing the Cutter Blade

If you notice that the paper isn't cut cleanly, you may need

to replace the cutter blade (part # C12C815291). You can

check its status as described below:

Press the Menu button on the printer, then press

until you see PRINTER STATUS.

Press Menu, then press

SERVICE LIFE.

Press Menu, then press

E*****F indicates a new cutter. If no stars are

displayed, the cutter needs to be replaced.

Caution:

Do not use the cutter for the

following media:

• Fine art paper (such as EPSON UltraSmooth,

Textured, or Velvet)

• Canvas

• Backlight film

• Vinyl

until you see

until you see CUTTER.

Return the ink lever to its locked position.

If you're using 110 ml cartridges, close the ink

compartment cover. If you're using 220 ml

cartridges, you'll have to leave the cover open.

Follow these steps to replace the cutter:

Press the Menu button on the printer, then

press

until you see MAINTENANCE.

Press the Menu button. You see

CUTTER REPL.

Press Menu to display EXEC, then press Menu

again. The print head moves to the cutter

replacement position.

Open the top cover.

Continue