Epson 850N Hızlı Kılavuz - Sayfa 6

Yazıcı Epson 850N için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Epson 850N 13 sayfaları. Ink cartridge for use with epson stylus color printer
Ayrıca Epson 850N için: Ürün Bilgi Formu (4 sayfalar)

Sayfayı Yazdır

EPSON Stylus COLOR 850N

Setting

Options

Auto line feed

Off, On

Network I/F mode

Off, On

Loading position

8.5 mm, 3 mm, Others

Economy

Off, On

Parallel I/F transfer rate

Fast, Normal

Changing control panel settings

Follow these steps to change the settings listed above:

1. Make sure the printer is turned off and has paper loaded.

2. Hold down the

color cleaning button and press the

power button. The printer prints a summary of

instructions for changing settings and choosing a language

for the instructions.

3. Press the

color cleaning button to print a list of current

settings (indicated with arrows) and additional instructions.

4. After you make the changes you want, turn the printer off

to save the settings. The settings remain in effect until you

change them again.

Character Tables

All character tables except Italic are the same as the PC437

table for hex codes 00 through 7F. Additional characters are

available for hex codes 80 through FF. You can select the

following character tables through the control panel or

software commands:

• PC 437 (U.S./Standard Europe)

• PC850 (Multilingual)

• PC860 (Portuguese)

• PC861 (Icelandic)

• PC863 (Canadian-French)

• PC865 (Nordic)

• Abicomp

• BRASCII

• Roman 8

• ISO Latin 1

• Italic (no characters available for hex code 15)

International character sets

You can select a number of international character sets with

the control panel or the ESC R command. Other sets can only

be selected with the ESC R command. You can select

additional characters with the ESC ( ^ command.

6 - EPSON Stylus COLOR 850N

Control Panel

black cleaning

button

color cleaning

button

Follow these guidelines when the control panel lights come on

or flash:

When the paper out light flashes , paper is jammed in

the printer. Turn off the printer and gently pull out all

paper. Then press the

When the paper out light comes on , your paper ran

out or is incorrectly loaded. Load paper in the feeder

and then press the

When an ink out light flashes , your ink supply is low.

B A

Make sure you have a replacement cartridge.

When an ink out light comes on , you need to replace

B A

the ink cartridge.

When the power light and paper out light flash and all

P S B A

the other lights are on, your printer has a carriage

error.

When all the lights flash , your printer may have an

P S B A

internal error.

Testing the Printer

You can run a self test to determine whether the problem

comes from the printer itself or some other source.

If the results are satisfactory, the problem lies in your

software settings, the interface cable, or your computer.

If the self test does not print correctly, you have a problem

with your printer.

Follow these steps to run the test:

1. Make sure both the printer and computer are turned off.

2. Disconnect the interface cable from the printer.

3. Make sure paper is loaded in the printer.

Caution:

Load paper that's at least 8.27 inches (210 mm) wide. This

prevents ink from spraying inside the printer and smudging your

printouts.

4/98

paper out light

black ink out light

color ink out light

load/eject button

power button

power light

load/eject button.