Axxess AX-ADVW01 Kurulum Talimatları Kılavuzu - Sayfa 2
Kablolar ve konektörler Axxess AX-ADVW01 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Axxess AX-ADVW01 8 sayfaları. Volkswagen data interface 2002-2017
Sayfayı Yazdır
From the 16-pin harness with stripped leads to the aftermarket radio (harness included with interface):
• Connect the Red wire to the accessory wire.
Note: If installing an ASWC-1 (sold separately), connect the Red wire on the
AX-ADTY01 harness as well.
• If the aftermarket radio has an illumination wire, connect the Orange/White wire to it.
The following (3) wires are only for multimedia/navigation radios that require these wires.
• Connect the Blue/Pink wire to the VSS/speed sense wire.
• Connect the Green/Purple wire to the reverse wire. (Not applicable in manual transmission
vehicles)
• Connect the Light Green wire to the parking brake wire.
• Tape off and disregard the following (10) wires, they will not be used in this application:
Blue/White, Brown, White, White/Black, Gray, Gray/Black, Green, Green/Black, Purple,
Purple/Black.
2
CONNECTIONS TO BE MADE
From the AX-ADVW01 harness to the aftermarket radio:
• Connect the Black wire to the ground wire.
• Connect the Yellow wire to battery wire.
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the Green wire to the radio's left rear positive speaker output.
• Connect the Green/Black wire to the radio's left rear negative speaker output.
• Connect the Purple wire to the radio's right rear positive speaker output.
• Connect the Purple/Black wire to the radio's right rear negative speaker output.
12-pin pre-wired ASWC-1 harness:
• This harness is to be used along with the optional ASWC-1 (not included) to retain steering
wheel audio controls. If the ASWC-1 is not being used, disregard this harness. If it will be
used, please refer to the ASWC-1 instructions for radio connections and programming.
Disregard the harness that comes with the ASWC-1.