Axxess AX-DSP Kullanım Kılavuzu - Sayfa 7

Kablolar ve konektörler Axxess AX-DSP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Axxess AX-DSP 10 sayfaları. Axxess digital signal processor

Sayfayı Yazdır

Inputs - Adjusting the way the inputs are installed.

• Subwoofer Input: Front + Rear - When using an OE radio, the subwoofer signal will be

summed from the front and rear signals.

Subwoofer - Select this option to use the subwoofer output signal when using an

aftermarket unit.

• Input Level Select - Use this section to indicate the option that was used for

installation, low level (RCAS) or high level (wire-to-wire). If using a T-harness the

option will be high level.

• Amplifier Turn-on

Signal Sense - Will turn-on the amplifier any time audio is detected, and keep it

on for 10 seconds past the last signal (so the amplifier doesn't shut off between

tracks). The main benefit of this is to prevent hiss when the radio is off.

Always on - Will keep your amplifiers on when the vehicle ignition is on and will

shut off with your ignition.

DSP APPLICATION

(CONT)

Continued on the next page

REV. 8/10/2017 INSTAX-DSP