DigiDesign 1622 1 Kurulum Kılavuzu - Sayfa 5
Aksesuarlar DigiDesign 1622 1 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DigiDesign 1622 1 14 sayfaları. I/o audio interface
Sayfayı YazdırUsing the 1622 I/O
The 1622 I/O
is a 16-channel digital au-
™
dio interface which features 20-bit ana-
log-to-digital, and 24-bit digital-to-analog
converters for superior dynamic range, re-
duced noise floor, and the capability to
work with the full 24-bit mixing, editing,
processing, and mastering environment of
Pro Tools.
The 1622 I/O can be used in two ways:
As a 20-bit Audio Interface for a compat-
ible Pro Tools system
As a stand-alone 20-bit audio converter
This Guide explains the indicators and
connectors on the 1622 I/O. It also ex-
plains how to use it with a Digidesign
Pro Tools system, or as an independent,
stand-alone 20-bit audio converter in your
studio.
If you are using the 1622 I/O with
Pro Tools, refer to the Pro Tools TDM Hard-
ware Installation Guide, which covers many
Pro Tools-specific aspects of the 1622 I/O.
The 1622 I/O is designed for use with
Pro Tools MIX and d24 cards. Do not connect
it to DSP Farm or Pro Tools III cards.
The 1622 I/O Interface
This section explains the connectors and
indicators on the front and back panels of
the 1622 I/O Interface, how they are used,
and offers suggestions for connecting the
1622 I/O to your studio.
1622 I/O Front Panel
The 1622 I/O has the following front panel
indicators, moving from left to right:
Front panel of the Digidesign 1622 I/O
1. Power
This switch applies power to the 1622 I/O.
The "I" position is on. The "O" position is
off.
2. Sync Mode
The Sync Mode LEDs indicate which sam-
ple rate clock reference is currently used by
the analog-to-digital converters (ADCs)
and the digital-to-analog converters
(DACs).
Using the 1622 I/O 1