Axxon LF755KB Kurulum Kılavuzu - Sayfa 14

PCI Kart Axxon LF755KB için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Axxon LF755KB 19 sayfaları.

Installation Guide for Axxon LF755KB PCI Express (PCIe) 4 Port RS422 SMPTE I/O Card (Low/Standard Height Mounting)

4.1.2 Windows NT4 driver for MAP/950

Overview

The Windows NT4 driver creates a Device Object for each port, and registers this with the operating system. The

serial port driver enables the following 16C95x features:

•

128-byte receiver and transmitter FIFOs

•

Optimized receiver interrupt handling – uses readable fill levels and thresholds

•

Automatic clock speed detection

A separate parallel port driver is provided, which creates the device Object and registers it with the Printer class

driver.

Installation

Install the hardware by following system instructions. Power up the system. Then follow the instructions below

depending on which functions are required. To upgrade the NT4 driver, simply install over the existing version.

Serial driver

1. Run "Install_Serial.exe" from the \NT4_Serial subdirectory on the disk.

2. When the install application starts, click Next to continue

3. Ensure 'install' is selected, and then click Next.

4. Click OK to accept the licence agreement.

5. The system will install the driver and start it. The ports are immediately ready for use.

Axxon Computer Corporation

V1.0