Epson AP-2250 Ürün Destek Bülteni - Sayfa 10

Yazıcı Epson AP-2250 için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson AP-2250 16 sayfaları. Product support bulletin(s)
Ayrıca Epson AP-2250 için: Ürün Destek Bülteni (20 sayfalar), Ürün Destek Bülteni (5 sayfalar), Ürün Destek Bülteni (6 sayfalar)

Epson AP-2250 Ürün Destek Bülteni
ESC ( t nl n2 dl .d2 d3 (Assign Character Tabie)
selectable with the ESC t n command. This is the table that will be replaced. Valid
corresponding to a registered table. lhii is the table that will replace the table
indicated by Variable d1. Valid Values for d2 are 0, 1,3,7,8, and 9 (see Table 2
dl
I
0 -1 Italic
Table 1
After using the ESC ( t command, the ESC t n command MUST be sent to select the
table before printing from the new table. For example, the command ESC ( t 3 0 1 3
0 is sent (assign Registered Table 3 (PC950) to Selectable Table 1 (PC437). In order
to print the Q character (ASCII 245), the command ESC t 1 must be sent. In the Basic
programming language, the sequence would be as follows:
LPRINT CHR$(27);7';CHR$(l);
LPRINT CHR$(245)
Some ESC/P2 documentation may illustrate as many as 22 different Registered
Tables. The Registered Tables are a part of the character set, therefore, they are
contained in the Character Generator ROM. The CG ROM differs based upon the
destination country. For thii reason, only the above Registered Tables are available
on LQ-570, LQ-1070, LQ-870 and LQ-1170 printers sold for the U.S. market. Foreign
Character Generator ROMs ARE NOT available in the United States. The following
PSB No: P-0082
Page:
1
I
3
I I 9 I
of
10
14
I
I