Epson AP-3250 Ürün Destek Bülteni - Sayfa 6
Yazıcı Epson AP-3250 için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson AP-3250 16 sayfaları. Product support bulletin(s)
Ayrıca Epson AP-3250 için: Ürün Destek Bülteni (20 sayfalar), Ürün Destek Bülteni (5 sayfalar), Ürün Destek Bülteni (22 sayfalar)
Sayfayı Yazdır
unless defined otherwise by the "ESC ( U command. Currently, the values for ml
and IT@ MUST be ml =2 and m2=0.
To determine the values for nl and n2 perform the following steps.
1.
Determine the desired vertical motion dii in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired distance is 1 inch.
2
3.
4.
5.
In the Basic programming language, the command would look like thii.
'Reverse" paper feed less than l/2 inch can be performed with this command. To
1.
Determine the desired vertical motion dice in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
Subtract the remainder in the quotient computed in step 3 from 256.
5.
The result from step 4 is the value for n1.
6.
PSB No: P-0082
Page: 6 of 14