Epson Artisan 710 Series Ağ Kurulum Kılavuzu - Sayfa 33
Yazıcı Epson Artisan 710 Series için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Epson Artisan 710 Series 36 sayfaları. Color inkjet printer
Ayrıca Epson Artisan 710 Series için: Buradan başlayın (4 sayfalar), Teknik Özellikler (2 sayfalar), Buradan Başlayın Kılavuzu (8 sayfalar), Servis Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Software installation failed
Make sure that the printer is connected to your network (see page 5 for wireless or
page 23 for Ethernet). Then remove and reinsert the CD to reinstall the printer
software.
Cannot communicate on a wired LAN
If you're switching from a wireless to a wired network connection, you need to
disable the wireless adapter using the printer's control panel. Select
printer's control panel, select
Advanced Setup
The printer does not appear in the Add Printer window (Mac OS X)
Make sure the printer driver was installed correctly and that your computer's TCP/
IP settings are configured correctly.
Cannot access a memory card over the network
■
Remove the memory card from the printer. Select
control panel, then select
>
Network
Read/Write.
■
For Macintosh, follow the instructions on page 29 to install an application
that allows you to access the printer's memory card slots over the network.
Printing Problems
Cannot print over the network
■
For wireless connections, print a Network Status Sheet (see page 35). If the
Link Status is Disconnected, make sure the wireless router or access point is
turned on and the settings are correct for your wireless network.
■
For wired connections, print a Network Status Sheet (see page 35) and make
sure the settings are correct for your network.
If the Network Status is Disconnected, try the following:
■
Make sure the Ethernet cable is securely connected to both the printer
and your router, access point, switch, or hub.
■
Try connecting to another port on your router, access point, switch, or
hub.
Network Settings
>
Disable Wireless LAN
Network Settings
Press
OK
>
Wireless LAN Setup
. Select
Yes
F
>
File Sharing Setup
, then press
again to update the setting.
OK
Setup
F
>
, then press
.
OK
on the printer's
Setup
>
Troubleshooting
on the
33