Archer D1x Kurulum/Konfigürasyon Kılavuzu - Sayfa 3

Bisiklet Aksesuarları Archer D1x için çevrimiçi göz atın veya pdf Kurulum/Konfigürasyon Kılavuzu indirin. Archer D1x 9 sayfaları.

Step 3:

Shifter Preparation

•

Remove the small screw holding the battery

door cover closed with a 1.5mm hex driver.

•

Insert the two 14500 li-ion rechargeable

batteries into the battery channel,

POSITIVE END FIRST.

•

Close the battery door and tighten the screw.

Note:Do not use alkaline AA batteries. Although they are the same size,

they run a much lower voltage and the shifter will not perform well.

•

Place the shifter along your chainstay and measure the cable and bowden

housing lengths you will need for your bike. Keep the housing as smooth

as possible. You may need to pre-bend it to get the right shape for your bike.

•

Peel back the bumper to expose the cable opening.