Epson C11C658011 Manuel - Sayfa 7

Yazıcı Epson C11C658011 için çevrimiçi göz atın veya pdf Manuel indirin. Epson C11C658011 13 sayfaları. Ultra hi-definition photo printer
Ayrıca Epson C11C658011 için: Broşür (2 sayfalar)

Sayfayı Yazdır

Caution: Be sure to insert the CD/DVD tray while the printer is

turned on; this ensures that the print position will be adjusted

automatically.

Do not insert the CD/DVD tray while the printer is printing;

otherwise, your printer may be damaged or the surface of the CD

or DVD may become dirty or scratched.

Make sure the CD/DVD

tray slides under the tab

(on both sides)

Designing CDs and DVDs

You can use the Epson Print CD program (included on the

Printer Software CD-ROM) to create and print a design with

images, graphics, and text. See your Printer Basics manual or

on-screen User's Guide for instructions.

Printing Your Design

After you have created your design and loaded a CD or DVD,

follow these steps to print:

1. Open the File menu and select

2. Make sure

EPSON Stylus Photo R380 Series

Stylus Photo R380

3. Select

CD/DVD

CD/DVD Premium Surface

Media Type setting.

4. Select

as the Print Confirmation Pattern setting

None

(Windows) or Test Print Pattern setting (Macintosh).

5. Click

Note: You can print on only one CD or DVD at a time. When the

Copies setting is set to 2 or more, remove each disc from the

tray after it has been printed, and then place the next CD or DVD

on the tray. Then press the

After you print, handle the CD or DVD carefully and allow the ink

to dry for at least 24 hours before playing the disc or inserting it in

a drive. Keep printed discs away from moisture and direct

sunlight.

After you finish printing on a CD/DVD, remove the CD/DVD tray

and set the front tray to the paper position by pushing up the tray

lever.

If you need to adjust the print position or color, see your

on-screen User's Guide or Printer Basics book.

Make sure the

arrow marks

are aligned

(Windows)

(Macintosh) is selected.

as the

Start button to resume printing.

Replacing an Ink Cartridge

When you print with low or expended ink cartridges, you see

a message on the LCD screen telling you which cartridges are

low or expended.

You'll also see a message on your computer screen when you

print telling you which cartridge is low or expended.

When a cartridge is installed in the printer for more than six

months, you may need to replace it if printouts don't look

their best. If the quality doesn't improve after cleaning and

aligning the print head, you can replace the cartridge even if

the cartridge is not expended.

Checking the Ink Cartridge Status

Follow the steps below to check how much ink is left in your

cartridges.

Note: You can also check the ink cartridges using your computer;

see your Printer Basics manual or on-screen User's Guide for

instructions.

1. Press

to enter the Setup menu.

Setup

2. Press l or r to select

3. You see a screen showing the status of the ink cartridges:

The cartridges are identified as follows:

(black),

(light cyan),

(cyan).

4. When you're done checking the ink cartridge status, press

. Press l or r to select

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once

you start replacing a cartridge, you must complete all the steps

in one session.

Caution: Leave the expended cartridge installed until you have

obtained a replacement, or the ink remaining in the print head

nozzles may dry out. To ensure good results, use genuine Epson

ink cartridges and do not refill them. Other products may cause

damage to your printer not covered by Epson's warranty.

10/06

Epson Stylus Photo R380

, then press

Ink Cartridge Status

(yellow),

(light magenta),

(magenta),

, then press

Epson Stylus Photo R380

- 7