Architectural Lighting Works LightPlane 11 Recessed Kurulum Talimatları - Sayfa 2

Aydınlatma Ekipmanları Architectural Lighting Works LightPlane 11 Recessed için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Architectural Lighting Works LightPlane 11 Recessed 3 sayfaları.

Sayfayı Yazdır
LIGHTPLANE 11 RECESSED
Install Instructions
1.
Gypsum Board Ceilings
Framing
8"
Ceiling
(installed after fi xture)
• Wings run behind Gypsum Board.
• Suspend with 1/4-20 Threaded Rod and
nuts in rear holes.
• Connect to Framing.
2.
3.
Tel: (510) 732-1794 Fax: (650) 249-0412 web: www.archltgworks.com
Threaded Rod
"Wings"
5
12
8 "
3
7
4 "
11
16 "
Electrical Conduit
T-Bar Ceilings
7
8
8 "
• Parrallel T-Bar should be spaced 8-7/8".
• T-Bar Brackets center & support fi xture on T-Bar.
• Tie off Hanger Wire to Wire Hanger Brackets.
• Connect sections if necessary.
• Use 8-32 Fasteners
• Run Electrical Conduit to fi xture
through 1/2" Knockout
• Remove Access Cover
• Make electrical connections, reattach
access cover.
Access Cover
Wire Hanger Brackets
T-Bar Brackets