ARCHITETTURA SONORA ICARUS Hızlı Başlangıç Kılavuzu

Konuşmacılar ARCHITETTURA SONORA ICARUS için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ARCHITETTURA SONORA ICARUS 4 sayfaları.

ICARUS_

STAND-ALONE

27cm

10.62"

Unpacking:

to remove Icarus from the shipping box carefully follow these steps

Icarus is shipped in a box

secured with packing foam;

due to its size and weight it

must always be handled by

two people.

Set up:

after unpacking Icarus proceed

with the orientation of the two satellites.

Using the supplied Allen wrench, unscrew the

joint that connects the satellite to the frame,

orient it in the desired position according to the

acoustic requirements and tighten it again so

that to keep the satellite in the desired position.

Repeat the same operation for both satellites.

Keep the supplied Allen wrench in a safe place

for future use.

Acoustic connectivity & settings:

ped with DSP on board: one for satellites and the other for the subwoofer. For everything concerning the regulation of the DSP, please

refer to the website www.architetturasonora.com or to your specialized dealer.

Remove the upper part of

the foam packing

protecting the module

inside the box, to release it.

the Icarus stand-alone necessarily requires a two channels ampli er equip-

Holding the metal frame

firmly gently pull the

Icarus out of the box. As

already mentioned it

requires two people.

Turn the module and

place into position,

ready for set-up and

installation.