Creek Audio EVOLUTION 50A Kullanıcı Talimatları - Sayfa 8
Amplifikatör Creek Audio EVOLUTION 50A için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Creek Audio EVOLUTION 50A 8 sayfaları. Integrated amplifier
Ayrıca Creek Audio EVOLUTION 50A için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (17 sayfalar)
Sayfayı Yazdır
Appendix
If more than one EVOLUTION 50s are being used, it may help to join them together via the remote
connections on the rear panel, using a special interface cable from Creek Audio.
This will
synchronise the operation of both products.
Check with your supplying dealer for details.
SOFTWARE INSTALATION
The RUBY module contains additional software to enable the EVO 50A/100A amp to function properly. When the amp is first turned-on,
after adding the RUBY module, there may be an 8 second delay as the new software is downloaded from the module into the amp's system
microcontroller. Once this is completed, the OLED display will show the extra features and the amp will work as normal.
This is how to confirm the Software revision: Power-off, Press and hold the INFO button, then press the power button-on and release the
INFO button after the Creek logo disappears. The display will show the model name, software version number and heatsink temperature.
To clear the screen and use the product, press or turn any button or control knob.
N.B. No A-weighting. Noise integrated from 30 Hz to 15 kHz for audio SINAD and SNR
measurements.
Aerial connections: 75 Ohm co-ax MALE. Use adapter supplied to convert to F Type socket.
The EVOLUTION 50A/100A radio, fitted with the RUBY module, can be operated virtually anywhere
in the world. First select the correct mains voltage to either 115 or 230V AC – 50 to 60 Hz and then
choose the correct region as described in the section above "GETTING STARTED IN YOUR REGION".
Please visit the Creek Audio website to view an instructional video, clearly showing this installation.
Creek Audio Ltd
Tel# 44 (0)1442 260146
www.creekaudio.com
Page 8