Creek Audio VOYAGE i20 Kullanım Kılavuzu - Sayfa 17

Amplifikatör Creek Audio VOYAGE i20 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Creek Audio VOYAGE i20 19 sayfaları.

DAC max performance

IR BUS IN

IR BUS OUT

Loudspeaker Outputs

Speaker output impedance

Headphone Output socket

Headphone output impedance

Mains voltage range

Mains fuse type and rating

Ground connections

Ground Lift

Finish colours

Power Consumption

Auto Standby

Auto Standby Menu

Power supply fuse

Weight

Size W/H/D

Caution

PCM 768kHz, 32-bit, DSD 22.4MHz

External IR sensor extender

Daisy chain link to another Voyage device

4mm binding posts with rear and side entry, plus spade lug

<0.02 Ohms 20Hz to 20 kHz (Damping factor >400)

6.3mm stereo jack socket

<22 Ohms, suitable for headphone 12 – 600 Ohms

230V nominal. Working range - 170V - 265V AC - 50Hz

115V nominal. Working range - 85V - 140V AC - 60Hz

Factory set to either 230V or 115V. Not user adjustable

T10AL 250V - 5 x 20mm glass cartridge fuse

10 Amp, Time-lag, or Anti-surge, rated at 250V

Turntable grounding post next to Line 1 / Phono

A 2-way switch is located under the chassis on the right

Silver or Black front panel. Outer cover is black

Idle, Max, Standby <20 Watts, 600 Watt, 0.5Watts

The amp will switch off after 30 minutes with no signal

Status and options controlled in Menu

T10AL 250V = 10 Amp, Time-Lag, rated at 250V, 5 x20mm

9kgs (20 lbs) net

11.5kgs (25.35 lbs) gross, packed

43 x 8 x 35 cm (17 x 3 x 13.8")

including feet, knobs, and terminals

Do not use outside or near water

Please heed all safety warnings