Creek Audio Destiny Kullanım Talimatları Kılavuzu - Sayfa 6

CD Çalar Creek Audio Destiny için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Creek Audio Destiny 8 sayfaları.

Sayfayı Yazdır

Destiny CD PLAYER

CONTROL AND OPERATION CONT'D

TO SEARCH QUICKLY FOR A PARTICULAR POINT ON A TRACK

During PLAY mode press and hold the fast forward or fast back buttons.When either of these buttons is pressed, the sound will be muted to

approximately one quarter of the normal volume level for the duration of the fast-forward or fast-back operation.

During PAUSE mode pressing either the fast forward or fast back button will release the pause mode and the search will continue normally with

a muted sound.

During this quick search operation, the player will search slowly for the first few seconds and then switch to searching fast.

FAST SEARCH (REMOTE CONTROL ONLY)

Using the remote control only, the fast search can be enabled by pressing the FAST button before pressing the fast forward or fast back buttons.

PROGRAMMED DISC PLAY (REMOTE CONTROL ONLY)

This feature allows you to play tracks in your preferred sequence. It is not possible to programme the CD player while the disc is playing. Press

the STOP button first, then enter a program. To program a desired sequence of tracks follow these steps:

Select your desired first track buy using the numeric buttons on your remote handset or the buttons marked forward or back.

Press the PROG button on the remote handset.

The MEMORY symbol will illuminate and the track number will be displayed. The first selected track is now stored in the memory.

Select the next track in the same manner and press PROG again, the second choice is now stored in the memory. Repeat these steps until all

desired tracks are stored.

TO PLAY TRACK 5, TRACK 8 AND TRACK 3 IN SEQUENCE

Enter the first choice by selecting track 5 in the manner described above. Press the PROG button to

store the first choice. Track 5 is now stored and the EDIT symbol will be displayed.

The time display will toggle between P: 1 and the playing time of the selection.

Enter the second choice. Press the PROG button to store the second choice. Track 2 is also stored.

Enter the third choice - track 8 - in the same way. Press the PROG

Press the PLAY button. The first programmed track will start playing and the PROGRAM symbol is

displayed.

LISTENING TO A PROGRAMMED SEQUENCE

Press the PLAY button. The PLAY symbol

of 16 tracks only can be stored in the PROGRAM memory.After the programmed sequence has finished playing, the track display and the

time display will show the number of tracks played and the total playing time.

CHANGING THE PROGRAM

Press the STOP button if the disc is playing. You can then modify the program by entering new track numbers.

CLEARING THE MEMORY

Press the STOP button twice if the disc is playing. Then press the OPEN/CLOSE button on the front of the CD player twice or the DISC

button on the remote handset twice. NOTE: The memory will also be cleared if the power is switched off on the rear panel.

REPEAT DISC PLAY

Use the REPEAT button to repeat a track, all tracks on the disc, or a programmed sequence of tracks.

REPEAT ONE TRACK

Make sure that the PROGRAM function has not been selected. Press the REPEAT button once and

the REPEAT 1 message will appear. Select the desired track and the track number will appear on the

track display. Press the PLAY button. The PLAY symbol

start playing.

At the end of the track the CD player will automatically return to the beginning. The track will continue to repeat until the STOP button is

pressed. Alternatively to cancel REPEAT 1, press the REPEAT button twice to toggle past REPEAT ALL and back to normal PLAY mode.

REPEAT ALL TRACKS ON THE DISC

Press the REPEAT button twice and the REPEAT ALL message will appear. Press the PLAY

button and the disc will start playing. The PLAY symbol

NOTE: You can select REPEAT ALL mode while the disc is playing.

At the end of the track the CD player will automatically return to the beginning. The track will continue to repeat until the STOP button is

pressed. If the REPEAT button is pressed again, the REPEAT message will disappear and normal play will resume.

Page Six

button to store this third choice.

will be displayed. The disc will start playing the first programmed track. NOTE: A maximum

will be displayed and the selected track will

together with REPEAT will be displayed.