Digigram LX6464ESe Kullanıcı Kılavuzu - Sayfa 7

Ses Kartı Digigram LX6464ESe için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digigram LX6464ESe 14 sayfaları. Ethersound pci express sound cards
Ayrıca Digigram LX6464ESe için: Kullanıcı Kılavuzu (15 sayfalar)

Sayfayı Yazdır

XP. For more recent Windows flavours, the name of the device can only be changed from the

Windows 'Sound' Control Panel . A DirectSound device can be multichannel (the application

must be able to manage this type of device). For more details, please refer to the online help of

this application.

Note: The "DirectSound Device Builder" application can be launched at any time once

the driver of the LX6464ESe is installed ( from <Start>, <Programs>, <Digigram>,

<Digigram Control Center>). It is necessary to reboot the computer to apply the

changes.

●

From the "Digigram drivers" window that is displayed, in the LX-ES tab, select the processing

granularity of the card, expressed in samples.

A granularity of 64 samples is the default value (recommended). Under DirectSound, selecting a

lower value (32) will decrease the latency, but may limit the number of devices that can be used

simultaneously without dropouts.

When using the ASIO interface, the granularity may be set to 32 samples (the ASIO driver uses

a single 64-channel device, which is much more efficient than using multiple separate devices).

For more details, please see the Control Panel online help or the " P erformance " section of the

DirectSound Device Builder, or the ASIO control panel online help.

Click on O k .

Click on the F inish button to complete the driver installation.

●

5.2 Removing the driver under Windows

●

Open the W indows Control Panel and double-click on the P rograms and Features icon.

●

Select " D igigram LXES Kit ..." , and C hange/Remove .

●

Select U ninstall .

●

Follow the instructions to finish removing the driver.

LX6464ESe & LX1616ESe user guide