Creekvine Designs FT1206-2CVD Montaj Talimatları - Sayfa 2

Çim ve Bahçe Ekipmanları Creekvine Designs FT1206-2CVD için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Creekvine Designs FT1206-2CVD 2 sayfaları. Treated pine garden bridge

Sayfayı Yazdır

Treated Pine Garden Bridge Assembly Instructions

Step 2:

Place the cross braces in the notch in the beams and attach using

2-1/4" screws.

Note: braces will be 2"x4" for 4' and 6' long bridges, and 2"x6" for larger sizes.

Step 3:

Lay all decking boards on beams with the counter-sunk hole facing

up. Attach with 2-1/4" screws.

Bridges with no rail are complete at this point. Continue for bridges with railings.

Step 4:

Attach posts to the beams using 1/4" x 2-1/2" washer head lag bolts.

Beams will be marked where the post should be attached.

Step 5:

Attach railings to the posts using 2-1/4" screws.

Step 6:

Attach wooden discs to the post tops using (2) 2-1/4" screws. Turn

wooden ball nial into center hole of the discs to secure.

Bridges with no pickets are complete at this point. Continue for bridges with pickets.

Step 7:

Evenly space the pickets across the railings, positioned so that the

tops are even with the top of the railing. Start the rst picket using

the post as a guide, making sure each picket remains plumb (straight

up and down).

Rev. 1/2020

1/2 Picket Rail Bridge shown.