Ayra ERO 540 MKII Kullanıcı Kılavuzu - Sayfa 9

Işık Fikstürü Ayra ERO 540 MKII için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ayra ERO 540 MKII 11 sayfaları. Rgb led movinghead

Moving parts are not functioning

well, values do not match and/or

rattling sounds are noticed

The fixture does not respond fast

enough to the set speed on my

DMX controller

The fixture does not respond to all

DMX-channels

Signal loss or distortion in DMX

values

Faulty stepping motor positioning

Moving parts can not keep up with

the set speed

Wrong DMX channel mode

Apply a DMX booster in your DMX

chain after 32 fixtures or less. After

a maximum of 32 fixtures the DMX

signal needs to be refreshed.

Possible value loss of stepping

motors. Activate the reset function,

or unplug the power supply and

plug it back in to activate the reset

program. This will reset all values

to the original 0-point.

Decrease the chase speed of your

DMX controller, as the stepping

motors of your fixture need some

time to move from one point to

another.

Check the DMX channel mode of

the fixture. If the wrong value is

set, change the channel mode to a

different setting and try again.