Digikeijs DR4088OPTO Kullanım Kılavuzu - Sayfa 7
Kontrol Ünitesi Digikeijs DR4088OPTO için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Digikeijs DR4088OPTO 11 sayfaları. Feedback module
Ayrıca Digikeijs DR4088OPTO için: Manuel (8 sayfalar), Kullanım Kılavuzu (14 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (15 sayfalar)
Sayfayı Yazdır
- 1. Table of Contents
- 2. General Informa on
- 3. Index
- 4. Warranty and Warranty Condi1Ons
- 5. Legal Informa1On
- 6. Product Overview
- 7. General Product Informa1On
- 8. Technical Specifica1Ons
- 9. Hardware Overview
- 10. Programming
- 11. DDR4088LN-XX Reset
- 12. Connec on Examples
- 13. Feedback Modules DR4088CS; 2-Wire Track
- 14. Feedback Modules DR4088OPTO; Hall Sensors, 3-Wire Track
- 15. Feedback Modules DR4088GND
DR4088CS / GND / OPTO
3.3 Reset DR408xx
Important! The DR4088xx The DR4088xx has no func1on for resePng to factory sePngs!
Since no sePngs or func1ons are stored in the feedback module, this is not necessary!
4.0 Connec on examples
In this chapter you will find some connec1on examples for the DR4088xx. Please note that we are not able to show all possibili1es.
Important! DR4088GND 3-wire opera1on:
Due to the H-bridge (track output) in the DR50xx, feedback devices in the DR4088GND version must not be used against track ground, as is usu-
ally the case with 3-wire tracks. This inevitably leads to the destruc1on of the DR50xx.
If a 3-wire driver s1ll wants to drive with the DR50xx and report back against track ground, the DR4088OPTO
can be used.
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
P 7