Digilent Arty S7 Referans Kılavuzu - Sayfa 4

Anakart Digilent Arty S7 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Digilent Arty S7 14 sayfaları.

Features

Xilinx Spartan-7 50 FPGA (xc7s50csga324-1)

8,150 slices (each slice contains four 6-input LUTs and 8 flip-flops)

2,700 Kbits of fast block RAM ()

Five clock management tiles, each with a phase-locked loop (PLL)

120 DSP slices

Internal clock speeds exceeding 450MHz

On-chip analog-to-digital converter (XADC)

Programmable over JTAG and Quad-SPI Flash

Memory

256MB DDR3L with a 16-bit bus @ 650MHz

16MB Quad-SPI Flash

Power

Powered from USB or any 7V-15V external power source

USB

USB-JTAG Programming circuitry

USB-UART Bridge

Switches, Push-buttons, and LEDs

4 Switches

4 Buttons

1 Reset Button

4 LEDs

2 RGB LEDs

Expansion Connectors

4 Pmod ports

32 total FPGA I/O (16 shared with shield connector)

Arduino/chipKIT Shield connector

45 total FPGA I/O (16 shared with Pmod connectors)

6 Single-ended 0-3.3V Analog inputs to XADC

3 Differential 0-1.0V Analog input pairs to XADC